How Do You Change The Blade On A Skag Zero Turn Mower

How to Safely Change Your SCAG Mower's Blades

Post Date: 10/01/2020

Your Scag mower is an essential piece of equipment, and properly maintaining it is key to keeping it running right for years to come up. When it comes to maintenance on your mower, one of the most integral parts to keep in top shape is the blades. Regular inspection, sharpening and replacement of the blades will preserve your mower and go along it working at its best. Find out the steps to blade maintenance for your Scag mower to become the near out of information technology!

Scag Makes Maintenance Piece of cake

Scag Five-Ride II

Scag is the leader in heavy-duty and commercial mowers. Their full array of lawn mowers is tiptop-of-the-line in immovability, comfort, ease of employ, and dependability. Whether you lot accept a Scag for personal or professional person use, you have a piece of mechanism that is easy to utilize, service and maintain.

Scag has even made blade care easy. Since sharp blades are necessary for an constructive mower, y'all want to inspect your mower's blades on a regular basis. Scag mower parts are easy to access across the entire car, making information technology simple to maintain the blades. Sharpening your mower blades, or replacing them if they become bent or damaged, tin exist completed in nether an hr on a Scag.

Necessary Prep Before Maintenance

Make sure yous are properly prepared before you lot perform any maintenance on your Scag mower. Cheque to ensure that you:

• Article of clothing the proper condom gear, including gloves, safety glasses, and boots.

• Have the mower parked on level footing in an open up area.

• Appoint the parking restriction.

• Use jack stands to properly support the mower while accessing blades.

• Remove the fundamental from the mower's ignition to prevent an accidental get-go.

How to Inspect the Blades

Inspecting your mower blades is a regular maintenance chore for every mower possessor. Yous want to make sure that your blades are sharp, cutting properly, and not damaged in whatsoever way.

To inspect your mower blades:

1. Raise the mower deck to the highest position possible.

2. Insert the lanyard pin in the uppermost cutting tiptop position to keep the cutter deck in place.

3. Examine the blades to see if they are straight. If they appear to be bent, they will take to be replaced.

4. Cheque the amount of wear on the blades. If you note that whatever portion of the blade is worn to half of its original thickness, the blade will need to be replaced.

5. Inspect the cutting edge of the blades. If there are any nicks or tiresome edges, the blade will need to exist sharpened.

How to Supersede the Blades

Whether you employ your Scag for commercial or residential use, yous should check the blades every few weeks, to make certain they are not damaged or bent. If using your mower professionally, the blades need to be replaced every few months. Mowing at habitation, you can supervene upon the blades once a year. Routine replacement of blades is of import because damaged blades can crusade issues with the unabridged mower, put undue wear on the engine, and can pose a safety hazard.

To supersede your mower blades:

1. Enhance the mower deck to the highest position.

2. Insert the lanyard pin in the uppermost cutting tiptop position to keep the cutter deck in place.

3. Secure the blades to ensure they practise non rotate. Scag'south Blade Buddy tool can aid hold the blades.

4. Remove the nut from the blade attaching commodities.

5. Take the cutter blade, bolt, and spacer off of the spindle shaft. Note that the front of the mower will demand to be slightly raised to remove the blade commodities from the spindle.

6. To install the new blade, place the flat washer on the blade bolt and slide the bolt into the hole on the blade. Make certain to supplant any worn spacers or washers. Brand sure that the new blade has the left fly pointing toward the top of the deck.

7. Put the spacer onto the blade commodities and install the bolt into the cutter spindle shaft.

8. Install the hex nut onto the bract bolt at the meridian of the cutter spindle. Ensure the blades cannot rotate, and so torque to 75 ft/lbs.

How to Acuminate the Blades

Mower blades should be sharpened whenever you notice that they are dull or chipped. Sharp blades are essential to effective and even mowing.

To acuminate your mower blades:

1. Employ a file, not a grinder, to sharpen the blades. Merely the top of the cutting edge needs to be sharpened.

2. Use the original bevel. Exercise non change it. Notation that y'all should not acuminate the blades more than 1/iii the width of the blade.

3. Check the blades for balance. They should be balanced to 1-one/ii oz-in.

Scag Mowers: Mow with Comfort, Mow with Confidence

Regularly inspecting, sharpening, and – when needed – replacing your mower blades is an integral office of keeping your Scag in top cutting shape. Scag makes it easy (and safe) to do. If you demand assistance with your Scag mower, contact Power Sports Company. If y'all're looking for a machine to go along your lawns tamed, visit our website to view our full line of Scag power equipment!

Mike Kunert is the general managing director of Powersports Company. He is very passionate nigh the powersports and outdoor equipment industry. He does everything from sales to service at the shop. With 23+ years in the powersports/outdoor equipment manufacture and many OEM factory certifications, he has a lot of knowledge about the industry.

« Return To The Listing

Source: https://powersportscompany.com/About-Us/Blog/post/how-to-safely-change-your-scag-mowers-blades/2020-10-01

Posted by: kunkelwhaeld.blogspot.com

Share this post